Yamaha MagicStomp - Reverb+Flange; Reverb+Symphonic

19
Reverb+Flange
Reverb and flanger effects in parallel.
Reverb->Flange
Reverb and flanger effects in series.
Reverb+Symphonic
Reverb and symphonic effects in parallel.
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb/Flange BAL 0 to 100% Reverb and flange balance (0% = all reverb, 100% = all flange)
Depth DPTH 0 to 100% Modulation depth
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb Balance BAL 0 to 100%
Reverb and flanged reverb balance
(0% = all flanged reverb, 100% = all reverb)
Depth DPTH 0 to 100% Modulation depth
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb/
Symphonic
BAL 0 to 100%
Reverb and symphonic balance
(0% = all reverb, 100% = all symphonic)
Depth DPTH 0 to 100% Modulation depth
Mix MIX 0 to 100% Mix level