Yamaha MagicStomp - Factory Set (Restore Factory Defaults); Restoring Factory Defaults

21
Delay->Early Ref.
Delay and early reflections effects in series.
Delay+Reverb
Delay and reverb effects in parallel.
Delay->Reverb
Delay and reverb effects in series.
Parameter Display Range Description
Delay L DT.L 0.0 to 1000.0 ms Left channel delay time
Delay R DT.R 0.0 to 1000.0 ms Right channel delay time
FB. Delay DTFB 0.0 to 1000.0 ms Feedback delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High Ratio HRAT 0.1 to 1.0 High-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Delay Balance BAL 0 to 100%
Delay and early reflected delay balance
(0% = all early reflected delay, 100% = all delay)
Mix MIX 0 to 100% Mix level
Type TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection simulation
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Room Size SIZE 0.2 to 20.0 Reflection spacing
Liveness LIVE 0 to 10 Early reflections decay characteristics (0 = dead, 10 = live)
Diffusion DIFF 0 to 10 Left and right early reflections spread
Density DNST 0 to 100% Reverb density
ER Number ERNO 1 to 19 Number of early reflections
Parameter Display Range Description
Delay L DT.L 0.0 to 1000.0 ms Left channel delay time
Delay R DT.R 0.0 to 1000.0 ms Right channel delay time
FB. Delay DTFB 0.0 to 1000.0 ms Feedback delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Delay High HRAT 0.1 to 1.0 Delay high-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Delay/Reverb BAL 0 to 100% Delay and reverb balance (0% = all delay, 100% = all reverb)
Mix MIX 0 to 100% Mix level
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Reverb Time RT 0.3 to 99.0 s Reverb time
Reverb High R.HI 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
Parameter Display Range Description
Delay L DT.L 0.0 to 1000.0 ms Left channel delay time
Delay R DT.R 0.0 to 1000.0 ms Right channel delay time
FB. Delay DTFB 0.0 to 1000.0 ms Feedback delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Delay High HRAT 0.1 to 1.0 Delay high-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Delay Balance BAL 0 to 100%
Delay and delayed reverb balance
(0% = all delayed reverb, 100% = all delay)
Mix MIX 0 to 100% Mix level
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Reverb Time RT 0.3 to 99.0 s Reverb time
Reverb High R.HI 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density