104 PSR-A5000 Reference Manual
10
10
Controller Function Settings
Contents
Assigning Specific Functions to the Foot Pedals and Panel Buttons (Assignable) ............ 104
• Assignable Functions (Assignable display) .......................................................................105
Editing the Assign Types of the Live Control Knobs and Joystick (Live Control) ...........111
• Assignable Functions (Live Control display) ....................................................................112
You can assign various functions to foot pedals connected to the FOOT PEDAL jacks, as well as the ASSIGNABLE
buttons and the [STYLE TEMPO LOCK/ASSIGNABLE] button.
The operation display can be called up via [MENU] [Assignable].
1 Touch to select the desired pedal or button.
Touching it again calls up the function list.
2 Select the function for the pedal or button.
For information about each function, refer to pages 105–110.
3 Make necessary settings of the selected function shown at the
bottom of the display.
You can make detailed settings of the selected function, such as which parts are
affected by the function, etc. If you want to change the function name that appears
on the pop-up window, touch [Rename] and enter the desired name. Up to 50 char-
acters can be used.
4 If necessary, set the polarity of the pedal by touching
(Menu).
Depending on the pedal you’ve connected to the instrument, it may work in the
opposite way (i.e., pressing it has no effect, but releasing it does). If such a case
occurs, use this setting to reverse the polarity.
Assigning Specific Functions to the Foot Pedals and Panel Buttons
(Assignable)
As described in the Owner’s Manual,
shortcuts can also be assigned to the
ASSIGNABLE buttons. In particular, the
shortcuts of the following functions can
be assigned only to ASSIGNABLE But-
tons.
• Regist Bank Information
• Regist Bank Edit
• Style Information
• Multi Pad Edit
• Scale Bank Edit
You can also assign other functions to
the pedal—Voice Guide Controller
(page 125), Punch In/Out of Song
(page 70) and Registration Sequence
(page 86). If you assign multiple func-
tions to the pedal, the priority is: Voice
Guide Controller Punch In/Out of
Song Registration Sequence
Functions assigned here
NOTE
NOTE
Hiding the pop-up window when the ASSIGNABLE buttons and the [STYLE TEMPO LOCK/ASSIGN-
ABLE] button are pressed
When you press one of the ASSIGNABLE buttons and the [STYLE TEMPO LOCK/ASSIGNABLE] button, the
pop-up window displaying the assigned function status is shown. You can also set the pop-up window to be hidden.
To do so, touch (Menu) on the Assignable display, and then set the “Button Pop-up” to Off.
To Next Page
Loading...
Need help?
General
