Yamaha PSR-A5000 User Manual

PSR-A5000 Reference Manual 111
10
Controller Function Settings
The setups of functions for Live Control knobs and joystick (called “Assign Types”) can be changed as desired from a
variety of options.
The operation display can be called up via [MENU]  [Live Control].
1 Touch [Knob] or [Joystick] on the display to select for the
setup.
2 Touch to select the desired knob or joystick axis.
Touching it again calls up the function list.
3 Select the function for the knob or joystick axis.
For information about each function, refer to pages 112–113.
4 Make necessary settings of the selected function shown at the bottom of the display.
You can make detailed settings of the selected function, such as which parts are affected by the function, etc.
If you want to change the function name that appears on the Live Control pop-up window, touch [Rename] and
enter the desired name. Up to 50 characters can be used.
Editing the Assign Types of the Live Control Knobs and Joystick (Live Con-
trol)
Assign Type 1
Assign Type 2
Assign Type 3
Assign Type 1
Assign Type 2
Assign Type 3
Assign Type 1
Assign Type 2
Assign Type 3
Hiding the pop-up window when the knob or joystick is operated
When you press the LIVE CONTROL [ASSIGN] button/button to which “Assignable” is assigned or move the
knobs/joystick, the Live Control pop-up window displaying the status of the parameter is shown.
You can set the pop-up window to remain hidden when the knob or joystick is moved but shown only when the but-
ton described above is pressed. To do so, touch (Menu) on the Live Control display, and then set the “Knob Pop-
up/Joystick Pop-up” to Off.
Reset the values of all the assignable functions of Live Control
Touching [Reset Value] on the top of the Live Control display allows you to reset all value settings for the functions
that can be assigned to the knobs or joystick to the factory default values.
If you want to reset the value of the function assigned to each knob/joystick individually, press the [ASSIGN] button/button to which “Assignable” is assigned or move
the knob/joystick to call up the Knob Pop-up/Joystick Pop-up, and then touch [Reset] on the desired function indication.
NOTE

Yamaha PSR-A5000 Specifications

General

Power Supply	PA-300C or an equivalent recommended by Yamaha
Sound Engine	AWM Stereo Sampling
One Touch Setting (OTS)	4 for each Style
Style Recommender	Yes
Language	English, German, French, Spanish, Italian
Panel Language	English
Lesson/Guide	Follow Lights, Any Key, Karao-Key, Your Tempo
Amplifiers	15 W x 2
Speakers	13 cm x 2 + 5 cm x 2
Keyboard	61 keys
Polyphony	128
Display	7-inch
Effects	Reverb, chorus, DSP, Master EQ
Storage	USB flash drive
Connectivity	USB TO HOST, USB TO DEVICE, MIDI IN/OUT
Fingering	Single Finger, Fingered, Fingered On Bass, Multi Finger, AI Fingered, Full Keyboard
Style Control	INTRO, MAIN, FILL-IN, BREAK, ENDING
File Format Compatibility	MIDI, WAV, MP3
Recording	MIDI, Audio (WAV)
Playback	SMF (Format 0 & 1)
Multi Pads	Yes
Audio	Playback and Recording
Audio Recording	WAV (44.1 kHz sample rate, 16 bit resolution, stereo)
Lyrics	Yes
Registration Memory	Yes
Overall Controls	Metronome
Miscellaneous	Metronome, transpose, tuning