PSR-A5000 Reference Manual 119
11
MIDI Settings
The explanations here apply when you call up “On Bass Note” display in step 2 on page 115. The settings here let you
determine the bass note for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to on are recognized as the bass notes of the chords for Style playback. The bass note
will be detected regardless of the [ACMP] or Split Point settings. When several channels are simultaneously set to on,
the bass note is detected from merged MIDI data received over the channels.
Touch the desired channel number to enter the checkmark. Touch the same location again to remove the checkmark.
The explanations here apply when you call up the “Chord Detect” display in step 2 on page 115. The settings here let
you determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off
messages received at the channel(s) set to on are recognized as the notes for detecting chords in Style playback. The
chords to be detected depend on the fingering type. The chord types will be detected regardless of the [ACMP] or split
point settings. When several channels are simultaneously set to on, the chord type is detected from merged MIDI data
received over the channels.
Touch the desired channel number to enter the checkmark. Touch the same location again to remove the checkmark.
On Bass Note—Setting the Bass Note for Style Playback via MIDI
Chord Detect—Settings for Chords used in Style Playback via MIDI
To Next Page
Loading...
