EasyManuals Logo

Yamaha PSR-A5000 User Manual

Yamaha PSR-A5000
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
98 PSR-A5000 Reference Manual
This instrument features the following Effect Blocks.
System Effect (Chorus, Reverb): These Effects are applied to the entire sound of this instrument. For each part,
you can adjust the depth of the System Effect. This can be set on the “Chorus/Reverb” display (page 100).
Insertion Effect 1–8: These Effects are applied only to a specific part. For each of these Effects, select an Effect
type specifically for the desired part (for example, Distortion, which would be applied only to the Guitar part).
Variation Effect: This Block can be used both as System Effects and Insertion Effects, and you can switch between
them.
This section covers the settings related to the Insertion Effects and Variation Effect on the Effect display. This display
is not available when the “Master” tab is selected at the top of the Mixer display.
Editing Effect Parameters (Effect)
Insertion Effect Allows you to assign the desired Insertion Effect Type for each part by touching the area above each
knob. You can adjust the degree to which each Effect is applied by using the knobs.
If you want to assign each of the Insertion Effects to a specific Part and select an Effect Type, touch
[Assign Part Setting] at the upper right of this area and make necessary settings in the window.
The assignable Parts for each Insertion Effect are as follows:
Insertion Effect 1–5: Keyboard Parts, Song channels 1–16
Insertion Effect 6: Keyboard Parts, Song channels 1–16, Microphone
Insertion Effect 7–8: Style Parts (except the Audio Part of the Audio Style)
Variation Effect Touch [Insertion] or [System] to switch the Effect Connection between the Insertion Effect and
System Effect, and then touch the right end of this line to select the desired Effect type.
When “System” is selected, this Effect is applied to all parts of the Song and Style as the System
Effect. When “Insertion” is selected, this Effect is applied only to the specified Song/Style part.
To adjust the degree to which the Effect is applied, use the knob of each part.
This is not available when the “Panel” or the “M.Pad” tab is selected at the top of the Mixer display.
NOTE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha PSR-A5000 and is the answer not in the manual?

Yamaha PSR-A5000 Specifications

General IconGeneral
Power SupplyPA-300C or an equivalent recommended by Yamaha
Sound EngineAWM Stereo Sampling
One Touch Setting (OTS)4 for each Style
Style RecommenderYes
LanguageEnglish, German, French, Spanish, Italian
Panel LanguageEnglish
Lesson/GuideFollow Lights, Any Key, Karao-Key, Your Tempo
Amplifiers15 W x 2
Speakers13 cm x 2 + 5 cm x 2
Keyboard61 keys
Polyphony128
Display7-inch
EffectsReverb, chorus, DSP, Master EQ
StorageUSB flash drive
ConnectivityUSB TO HOST, USB TO DEVICE, MIDI IN/OUT
FingeringSingle Finger, Fingered, Fingered On Bass, Multi Finger, AI Fingered, Full Keyboard
Style ControlINTRO, MAIN, FILL-IN, BREAK, ENDING
File Format CompatibilityMIDI, WAV, MP3
RecordingMIDI, Audio (WAV)
PlaybackSMF (Format 0 & 1)
Multi PadsYes
AudioPlayback and Recording
Audio RecordingWAV (44.1 kHz sample rate, 16 bit resolution, stereo)
LyricsYes
Registration MemoryYes
Overall ControlsMetronome
MiscellaneousMetronome, transpose, tuning

Related product manuals