EasyManua.ls Logo

Yamaha RDX-E700 - Service Manual

Yamaha RDX-E700
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
IMPORTANT NOTICE
SERVICE MANUAL
TRAY LOCK MODE / トレーロックモード ......... 12
FACTORY RESET /
ファクトリーリセット ......... 12
PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . .13–16
BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .17
SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . .18–23
RDX-E700 EXPLODED VIEW . . . . . . . . . . . . . . . . . .24
RDX-E700 MECHANICAL PARTS . . . . . . . . . . .25–26
NX-E700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . .28–29
CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .2–4
PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .
4
LOCALE MANAGEMENT INFORMATION . . . . . . . .5
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . . 6
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SPECIFICATIONS /
参考仕様 . . . . . . . . . . . . . . . . . . 8–9
DIMENSIONS /
寸法図 . . . . . . . . . . . . . . . . . . . . . . . . . 9
INTERNAL VIEW /
各部名称 . . . . . . . . . . . . . . . . . . . .10
RDX-E700 DISASSEMBLY PROCEDURES /
RDX-E700分解手順 . . . . . . . . . . . . . . . . . . . . . . .10–11
100991
© 2005 YAMAHA CORPORATION. All rights reseved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
’05.11
RDX-E700/
NX-E700
MICRO COMPONENT SYSTEM
MCR-E700
RDX-E700
NX-E700
The MCR-E700 consists of the RDX-E700 and the NX-E700.
MCR-E700 RDX-E700 NX-E700 で構成されています。

Other manuals for Yamaha RDX-E700

Questions and Answers

  • J
    John HaasAug 27, 2025
    Why do my Yamaha Receiver speakers make no sound?
    • N
      Nicolas RamirezAug 27, 2025
      If your Yamaha Receiver speakers aren't producing sound, there are several potential causes: * The volume might be set too low; try increasing it. * The Mute function could be enabled; disable it. * The input source may be incorrect; select the correct one. * Cables might be improperly connected; ensure all cables are correctly attached. * The disc may be incompatible; use a supported disc. * If playing a DTS source, make a digital connection to a component with a DTS decoder and select “RAW” for “DIGITAL OUTPUT” with the OSD menu.
  • I
    ihullAug 27, 2025
    Why Yamaha remote control does not work for operating TV?
    • J
      Julie BruceAug 27, 2025
      The remote control code may be incorrect. Set the correct remote control code. Depending on the model and year of the product, the remote control may not be able to operate it partly or wholly. In this case, use the remote control supplied for the product.
  • W
    Wanda AllenAug 26, 2025
    What to do if Yamaha remote control does not work for operating the DVD receiver?
    • W
      William KerrAug 26, 2025
      The remote control may be operated outside the remote control operation range. The remote control sensor on the DVD receiver may be exposed to direct sunlight or lighting (inverted fluorescent lamps), so change the lighting or DVD receiver’s orientation. The remote control mode selection may be improper, so select the mode that suits your purpose. The batteries may be worn out, so replace the batteries with new ones.
  • S
    stacey37Aug 26, 2025
    Why do the speakers make no sound on my Yamaha RDX-E700?
    • S
      Sarah CraigAug 26, 2025
      Several factors could be at play. Check that the volume isn't set too low and that the Mute function is disabled. Also, verify you've selected the correct input source and that all cables are properly connected. If you're using a disc, ensure it's compatible with the receiver. Finally, if playing a DTS source, make a digital connection to a component with a DTS decoder and select “RAW” for “DIGITAL OUTPUT” in the OSD menu.
  • C
    Christopher YoungAug 26, 2025
    What to do if Yamaha RDX-E700 Receiver power turns on but immediately shuts off?
    • M
      Michael SloanAug 26, 2025
      First, ensure the power cable is firmly plugged into the outlet. Next, check all speaker cables to ensure they are properly connected and not shorted. If the receiver experienced a strong electrical shock, set it to Standby, disconnect the power cable for 30 seconds, then reconnect and turn it on.
  • A
    Alyssa BauerAug 25, 2025
    How to fix a Yamaha Receiver remote control that is not working?
    • R
      Ronald ReynoldsAug 26, 2025
      If the remote control isn't operating the Yamaha Receiver, consider these possibilities: * You may be operating the remote outside of its operational range. * The remote control sensor on the receiver might be exposed to direct sunlight or certain lighting. * The remote control mode selection may be incorrect; select the appropriate mode. * The batteries might be worn out; replace them with new ones.
  • M
    Matthew HendrixAug 25, 2025
    What to do if my Yamaha RDX-E700 Receiver power turns on but immediately shuts off?
    • S
      Samantha WrightAug 25, 2025
      If your Yamaha Receiver turns on but immediately shuts off, it could be due to a few reasons. First, ensure the power cable is firmly plugged into the outlet. Second, check the speaker cables to make sure they are properly connected and not shorted. Lastly, if the receiver experienced a strong electrical shock, set it to Standby mode, disconnect the power cable for 30 seconds, then reconnect and turn it on.
  • S
    staylorSep 4, 2025
    What to do if condensation forms on the disc reading lens of my Yamaha RDX-E700?
    • D
      Dorothy RogersSep 4, 2025
      If, when moved the DVD receiver from a cold place to warm one, condensation may be from on the disc reading lens, wait for one to two hours, then try again.
  • D
    Daniel ShepardSep 7, 2025
    How to fix a Yamaha RDX-E700 when a digital equipment produces noises?
    • V
      Veronica KentSep 8, 2025
      The DVD receiver may be placed too close to digital or high-frequency equipment. Try placing the DVD receiver further away from such equipment.
  • B
    brittanysullivanSep 7, 2025
    Why does Yamaha RDX-E700 Receiver have too much noise during stereo broadcast?
    • C
      crystalglassSep 7, 2025
      The FM antenna may be connected improperly. Make sure the FM antenna is connected properly. Also, the radio station you selected may be far away from your area or radio wave reception is weak in your area. Try Manual Tuning to increase the signal quality or use a multi-channel outdoor antenna.

Summary

To Service Personnel

Critical Components Information

Details on components requiring exact replacement due to special characteristics.

Leakage Current Measurement

Procedure to verify proper insulation of conductive surfaces after service.

Laser Safety Precautions

Laser Emitting Conditions

Information on laser beam emission during operation and handling precautions.

Electrostatic Discharge Prevention

Grounding Procedures

Essential steps for grounding worktables and personnel to prevent static damage.

DVD Mechanism Handling

Specific precautions for handling the high-precision DVD mechanism to avoid damage.

RDX-E700 Specifications

Amplifier Section Specifications

Technical details for the amplifier, including output power, distortion, and sensitivity.

General Specifications

Covers power supply, consumption, weight, dimensions, and included accessories.

NX-E700 Speaker Specifications

RDX-E700 Disassembly Procedures

Top Cover Removal

Step-by-step guide for safely removing the RDX-E700's top cover.

Front Panel Unit Removal

Step-by-step guide for safely removing the RDX-E700's front panel.

DVD Mechanism Assembly Removal

Step-by-step guide for safely removing the RDX-E700's DVD mechanism.

Manual Tray Ejection Procedure

Factory Reset Procedure

Performing Factory Reset

Detailed steps to reset the DVD Mechanism Assy to factory default settings.

Block Diagram

Schematic Diagram - MPEG 1;2 (Front End)

Schematic Diagram - MPEG 1;2 (Back End)

Schematic Diagram - Main Microprocessor

Schematic Diagram - Main Function & Amplifier

Schematic Diagram - Front Panel

Schematic Diagram - Power Supply Unit

RDX-E700 Exploded View

RDX-E700 Mechanical Parts List

Sub Panel Assembly

Part details for the RDX-E700 sub panel assembly.

RDX-E700 Mechanical Parts (Continued)

Power Supply Unit

Part details for the RDX-E700 power supply unit.

DVD Mechanism Assembly

Part details for the RDX-E700 DVD mechanism assembly.

NX-E700 Speaker Parts List

Remote Control Layouts

Remote Control Schematic Diagram

Remote Control Key Function Mapping

Yamaha RDX-E700 Specifications

General IconGeneral
TypeReceiver
Audio Channels2.1
Remote ControlYes
Speaker Impedance6 ohms
Amplifier TypeDigital
Output Power100W per channel (6 ohms, 1kHz, 10% THD)

Related product manuals