Yamaha RX-A2000 User Manual

SETUP
Setting various functions (Setup menu)
En 114
Distance
Adjusts the timing at which the speakers produce audio
so that sounds from the speakers reach the listening
position at the same time.
Selecting adjustment units
Use iCursor B / C to select the unit for distance
(meters or feet), and press iENTER.
Setting distances for each speaker
Use iCursor B / C to select the speaker you want to
configure, and press iENTER.
Then use iCursor D / E to set the distance from the
speaker to your listening position.
Level
Separately adjusts the volume of each speaker.
Use iCursor B / C to select the desired speaker, and
press iENTER.
Then use iCursor D / E to adjust the volume for the
selected speaker.
Parametric EQ
Adjusts sound quality of tone using a parametric
equalizer.
PEQ Select
Select an equalizer type.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with
automatic setup and manually copy that information to the
manual adjustments.
Front L / Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R / Subwoofer1 / Subwoofer2
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set “PEQ Select” to “Manual” and use “PEQ Data
Copy” to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
1
Use iCursor B / C repeatedly to select
“Band / Gain,” “Freq. / Gain,” or “Q / Gain”
and press iENTER.
2
Use iCursor D / E repeatedly to adjust the
parameter and use iCursor B / C
repeatedly to adjust the gain.
3
Press iENTER to exit the edit window.
4
Repeat steps 1 to 3 to configure other
parameters.
5
Press hON SCREEN to close the menu.
ON SCREEN
ENTER
LEVEL
SOURCE
RECEIVE
R
AV
A
UDIO
4
3
1
2
7
5
6
V-AUX
4
3
1
2
US
B
MULTI
NET
P
H
O
N
O
TUNER
DOC
K
T
U
N.
/CH
S
IRI
US
C
ATE
GO
R
Y
[
A
]
i
A
h
Adjustable range 1.0 ft. to 80.0 ft. (0.30 m to 24.00 m)
Default setting 10.0 ft. (3.00 m)
Adjustment
increments
0.2ft. (0.05m)
Adjustable range -10.0 dB to +10.0 dB
Default setting 0.0 dB
Adjustment
increments
0.5 dB
You can also adjust the volume of each speaker by
using ALEVEL.
Press ALEVEL and use iCursor B / C to select
the desired speaker. Then use iCursor B / C to
adjust the volume for the selected speaker.
Manual Manually adjust equalizer sound.
Flat Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
Front Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
greater quality than other speakers.
Natural Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when “PEQ
Select” is set to “Flat.”
Through (Default) Disable the equalizer.
Flat Manual Copy the “Flat” parametric equalizer
information acquired with automatic
setup.
Front Manual Copy the “Front” parametric equalizer
information acquired with automatic
setup.
Natural Manual Copy the “Natural” parametric equalizer
information acquired with automatic
setup.
To reset all parameter settings for the selected
speaker, select “Yes” in “Reset” and press iENTER.

Yamaha RX-A2000 Specifications

General

Brand	Yamaha
Model	RX-A2000
Category	Receiver
Language	English