Yamatake STD920 - Erasing Calibrated Data

Yamatake Corporation Maintenance and Troubleshooting
ST3000 Smart Transmitter Series 900 Electronic Differential Pressure/Pressure Transmitter 7-25
7-5 : Erasing Calibrated Data
7-5-1 :Erasing Calibrated Data
Reset the calibrated data to the initial values (factory set data):
Step Description SFC screen
1
Press the and keys, in
that order.
2
Press the keys.
• The calibrated data is initial-
ized.

SHIFT
COR-
K
RECT
RESET
SHIFT-
DSTJ FIT-1234
RESET CORRECTS?
ENTER
( Yes )
NON-VOL
DSTJ FIT-1234
CORRECTS RESET
DSTJ FIT-1234
READY...