5 Description of the driving position
17
5.1.2 Diesel gauge
= Full
= Empty
• The diesel gauge operates when the starter key is in
ON position. It indicates the level of diesel in the
tank.
• When the gauge reaches the two indicators near the
symbol "Empty" (the leftmost cubes), fill up as soon
as possible.
Note
The gauge indication is affected by the level of
machine tilt.
5.1.3 Cooling fluid temperature indicator
C = cold
H = hot
• It indicates the temperature of the engine cooling
fluid. The normal temperature is close to zone (1) dur-
ing normal operation.
• If the temperature of this coolant reaches the limit(2)
during working, then slow the engine down and wait for
it to return to normal.
• When the engine is cold, top up with cooling fluid
following the procedure described in chapter
4.2 Checking and topping up the level of
cooling fluid , page 86
To Next Page
