5 Description of the driving position
29
5.3.6 Travel levers and pedals
DANGER
It is strictly forbidden to handle the machine controls outside the cockpit.
Incorrect use of the machine may cause serious injury or even death. Personnel involved
in using and maintaining the machine must familiarise themselves with the content of
this manual before carrying out a task.
WARNING
Before handling the travel levers, check whether the machine is in normal or reverse po-
sition. The machine is in the normal position when the blade is on the same side as the
work equipment.
If the machine is in the reverse position, the displacement levers must be handled in re-
verse to move forward and backward.
Normal position Opposite position
1 = Blade
To Next Page
