2 Usage precautions
72
2.1.5 Accessing the machine
• Do not jump on or out of the machine. Do not climb into or out of the machine when it is
operating as this may cause physical injuries.
• When you enter and leave the machine, face the machine and use the handles and the top
of the track.
• Use the contact points indicated by arrows in the il-
lustration opposite to climb onto and descend from
the machine.
• Do not use the command levers as handles.
• Always maintain three points of contact.
• If the handles or the track is dirty or covered with
oil, wash them off.
CAUTION
Make sure that you do not bang your head against the rearview mirror when you climb
into or out of the cab.
2.1.6 Fasten your safety belt and adjust the rearview mirror(s)
• The operator's seat is fitted with a safety belt.
• Always fasten your safety belt and adjust it before
starting the machine.
WARNING
The seat belt must be replaced after an accident or if it is damaged.
• The seat and its support must be checked by your dealer after an accident.
• If the seat and/or its support are damaged they must be replaced immediately.
• Adjust the rearview mirror(s) so that you have perfect visibility around the machine.
To Next Page
Loading...
