9 Options
53
9.14 Centralized greasing system
• The centralised lubrication automates the greasing of the swivel pins on your machine.It
comes with a timer allowing adjusting the lubrication cycle and time.
CAUTION
The lube cycles are factory set to optimize the performance of your machine, it is not ad-
visable to change them.
• A switch in the cockpit allows to launch the lubrication of the machine swivel points.
• To refill the centralized greasing system, connect the grease pump on the filling connector
nipple (B).
3 Recommended greases and fluids , page 144
CAUTION
Do not plug the hole at the top of the tank in order not to block the filling.
DANGER
In case of over filling, the tank can burst and cause physical injuries.
A= Tank
B= Filling connector
C= Control plate lid
MAX= Filling limit
To Next Page
