9 Options
60
9.16.1 Dismantling the accessory
1. Park the machine preferably on a stable, flat and level surface.
2. Place the accessory on the ground.
3. Turn the switch (1) to ON.
The contactor switch indicator lights and the alarm sounds.
WARNING
If the warning light does not come on or if the alarm does not sound, stop the current
operation and contact your dealer.
4. Hold switch (2) in the locked position until the locking pins are completely retracted.
The green light comes on. The control rod is visible (C).
5. Take the boom to disengage the accessory hooks on the bucket pin or accessory.
6. Move the quick hitch away from the accessory.
7. Turn the switch (1) to OFF.
The light goes off and the alarm stops.
To Next Page
