DECLARATION OF CONFORMITY
The undersigned YANMAR C.E. Europe SAS, 25 rue de la Tambourine, 52115 ST-Dizier FRANCE states that the
designated machine:
Description - Generic name - Function - Model - Type - Serial number - Trade name
VIO801AXX – VIO80–1A – EXCAVATORS – VIO80–1A – VIO – XXXXXXXX – VIO80–1A
Special equipment:
– XXXX
– XXXX
* complies with the provisions of the following European directivesand the national legislations implementing them.
• 2006/42 CE
• 2004/108 CE
• 2000/14 CE + 2005/88 CE
Procedures applied for conformity assessment are:
NF EN ISO 3744;
NF ISO 6395
produced by: SNCH, 11, route de Luxembourg L-5230 Sandweiler
LUXEMBOURG
Net power output:
39,3 kW * 1900 rpm
Measured sound pressure
97,8 dBA
Guaranteed sound pressure
98 dBA
Name and address of the person established in the European community, authorized to compile the technical file and
transmit it in whole or part to the public authorities in response to a reasonable request:
Jean Marc REYNAUD, Directeur Général, YANMAR C.E. Europe SAS – 25, rue de la Tambourine 52115 SAINT DIZIER
CEDEX –FRANCE
* The following documents were used in the design of the machine:
- Harmonised standards:
EN 474–1; EN 474–5;
Done at Saint-Dizier, the
Jean-Marc REYNAUD, Directeur Général
XX/XX/XXXX
To Next Page
Loading...
