9 Options
56
Mounting the accessory
1. Place the accessory on a stable, flat surface.
2. Clean all the parts.
3. Be equipped with the wrench supplied with the accessory and insert it into the quick hitch
hole.
4. Turn the key to unlock the quick hitch (1).
5. Remove the key and store it.
6. Place the arm equipped with the quick hitch on the accessory to engage the accessory hooks
on the bucket or accessory pin.
7. Rotate the quick hitch slowly lifting the boom to fully engage the quick hitch to the bucket
or accessory.
8. Manoeuvre the bucket or accessory to low height from the ground to see if it is locked in
the quick hitch.
Note
Check that the indicator is in the locked position.
To Next Page
Loading...
