2 Usage precautions
76
• Do not use the machine's lowering force.
Note
Do not use the machine's lowering force to dig
the ground.
• When excavating a hard rock, keep the ma-
chine's tracks flat on the ground.
Note
It is also recommended to break hard rock into
several pieces using other means to prevent
damage to the machine.
• Be careful when pulling the equipment out.
When you retract the equipment for side movement and
transport, make sure that the bucket and blade do not
come into contact.
• Support the blade on both sides.
When you use the blade as a support, press the blade
down on both sides.
• Pay attention to the blade during excavation.
When carrying out a deep excavation on the ground in
front of the blade, make sure that the blade does not
come into contact with the boom cylinder. Place the
blade at the back if it is not in use.
• Do not lift loads without a suitable fastening de-
vice; it is strictly forbidden to wrap a sling around
your machine's accessory or suspend it to a bucket
tooth.
Do not hang a load without the kit's lifting
facilities.
9.3 Lifting Kit , page 46
To Next Page
