To Next Page

To Previous Page

DOOR

48"

(121,9 cm)

140-5/8"

(352,2 cm)

(15,2 cm)

Move to the opposite side. Using the long edge of the panel as a lever, move the

panel side-to-side until the top corner is ush to the oor frame (Fig.B).

Secure panel with two 2" nails in the corners.

BEGIN

Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.

Use a chalk line or use pre-painted grid lines to nail into joists under panel.

Ensureyouroorframeissquarebyinstallingonepanel

andsquaringframe.

Fig.A

Fig.B

Fig.C

Check the oor frame is square by measuring diagonally across the frame corners. If the measurements are the

same your oor frame is square. The measurement will be approximately 170-1/4" (432,4 cm) (Fig.C).

PARTSREQUIRED:

x62

5/8 x 48 x 96"

(1,6 x 121,9 x 243,8 cm)

Gridlinesup

Seam

12"

(30,2 cm)

2" (5,1 cm)

Flush

(2)Nails

FLOOR PANELS

3/4"

(1,9 cm)

DOOR

170-1/4"

(432,4 cm

170-1/4"

(432,4 cm

Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48"

edge and corner ush to the oor frame (FigA). Secure panel with two 2" nails in the

corners.

Yardline OAKRIDGE 8 x 12 User Manual

Questions and Answers: