81
SHINGLES - RIDGE CAP
• You will nish off the top of the roof with a ridge cap made from shingles.
Note: • You will need about 30 - 32 cut pieces.
Cut shingles into THREE pieces. Hint: Use cut-off pieces rst.
Scoreshingle,
thensnap-offangledcut.
Install rst ridge cap ush to shingles at front, as shown.
Install second ridge cap 5" back, as shown.
2
3
1
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm
Topofslot.
WeatherSeal
Flush
(1)Nailpersidethroughweatherseal.
(1)Nailpersidethroughweatherseal.
5"
12,7 cm
FRONTOF
SHED
FRONTOF
SHED
Flush
30to32
Pieces