Parameter Tables 5-6
Table 5.2 – Parameter Attribute
Parameter Description Attribute
n138 FBL Delay Time 138 (8Ah)
n139 Energy Saving Select 139 (8Bh)
n140 Energy Savings Gain 140 (8Ch)
n141 V Lower Limit@60Hz 141 (8Dh)
n142 V Lower Limit @ 6Hz 142 (8Eh)
n143 Time of Avg kW 143 (8Fh)
n144 Tuning Voltage Limit 144 (90h)
n145 Tuning Step V@100% 145 (91h)
n146 Tuning Step V@5% 146 (92h)
n147 Motor Rated Volts 147 (93h)
- Not Used 148 (94h)
n149 Pulse Train Scale 149 (95h)
n150 Pulse Monitor Sel 150 (96h)
n151 Modbus TimeOut 151 (97h)
n152 Modbus Ref Units 152 (98h)
n153 Modbus Address 153 (99h)
n154 Modbus Baud Rate 154 (9Ah)
n155 Modbus Parity 155 (9Bh)
n156 Transmission Wait Time 156 (9Ch)
n157 RTS Control 157 (9Dh)
n158 Motor Code 158 (9Eh)
n159 Energy Sav @ 60 Hz 159 (9Fh)
n160 Energy Sav @ 6Hz 160 (A0h)
n161 Power Detection Width 161 (A1h)
n162 Power Det Filter 162 (A2h)
n163 PID Output Gain 163 (A3h)
n164 PID Feedback Select 164 (A4h)
n165 OverHeat Protection Select for Resistor Unit Mount 165 (A5h)
n166 Input Phase Loss Detection Level 166 (A6h)
n167 Input Phase Loss Detection Time 167 (A7h)
n168 Output Phase Loss Detection Level 168 (A8h)
n169 Output Phase Loss Detection Time 169 (A9h)
- Not Used 170 (AAh)
- Not Used 171 (ABh)
- Not Used 172 (ACh)
n173 DC Injection P Gain 173 (ADh)
n174 DC Injection I Time 174 (AEh)
n175 Carrier Freq Decel Sel 175 (AFh)
- Not Used 176 (B0h)
- Not Used 177 (B1h)
- Not Used 178 (B2h)
n179 Software ID 179 (B3h)