YASKAWA CIPR-GA50C series - Drive Start-Up and Configuration; General-Purpose Setup Mode

1 English
22 YASKAWA TOMPC71061753A YASKAWA AC Drive GA500 Installation and Operation Instruction
Figure 1.3 External Dimensions of Crimp Ferrules
Table 1.4 Crimp Ferrule Models and Sizes
Wire Gauge
mm
2
(AWG)
Model L (mm) L1 (mm) φd1 (mm) φd2 (mm)
0.25 (24) AI 0.25-8YE 12.5 8 0.8 2.0
0.34 (22) AI 0.34-8TQ 12.5 8 0.8 2.0
0.5 (20)
AI 0.5-8WH,
AI 0.5-8OG
14 8 1.1 2.5
◆ Drive Start-Up
■ Set up the Drive with General-Purpose Setup Mode
Drive parameters are in letter groups from A to U. Setup Mode [STUP] contains only the most
frequently used parameters to help you set up the drive more easily.
Figure 1.4 Parameters in General-Purpose Setup Mode
Table 1.5 shows the parameters available in Setup Mode. To access parameters not shown in the
Setup Mode, use the menu.
Table 1.5 Parameters in General-Purpose Setup Mode
User Parameters Parameter Name
A2-01 A1-02 Control Method Selection
A2-02 b1-01 Frequency Reference Selection 1
A2-03 b1-02 Run Command Selection 1
A2-04 b1-03 Stopping Method Selection
A2-05 C1-01 Acceleration Time 1