YASKAWA DX200 - Preparing the CF;USB for Upgrading

3-2
165559-1CD
HW1481993
DX200 Standard Setup
3 Programming Pendant Setup
3.1 Preparing the CF/USB for Upgrading
3.1 Preparing the CF/USB for Upgrading
Write the data into the “CF/USB for operations” which is to be inserted into
the programming pendant as follows:
1. Insert the CF into the CF reader/writer and the USB into the USB slot.
Any CF reader/writer of (D:) to (J:) can be used.
(In case of CF)
CF CF Reader/Writer
(In case of USB)
USB and USB Slot
Insert
Insert
11/44