YASKAWA DX200 - Programming Pendant Flash Rom Format Procedure

6 Troubleshooting
6.3 Programming Pendant Flash Rom Format Procedure
6-4
165559-1CD
HW1481993
DX200 Standard Setup
6.3 Programming Pendant Flash Rom Format Procedure
Flash Rom of the programming pendant can be reformatted with the
following procedures. Note that the pendant application software written
in the Flash Rom of the programming pendant will be deleted if Flash Rom
of the programming pendant is reformatted.
(1) While pressing [INTERLOCK], [9], and [SELECT] simultaneously,
turn ON the DX200 main power supply.
(2) Pressing [ENTER] key calls up the following window. Touch OK
button at the right top of the dialog box to close the box.
(3) Use the pen to touch the left bottom, and the task bar appears.
Then touch "START" in the task bar. When START menu
appears, touch "Programs" and then "Windows Explorer".
36/44