YASKAWA DX200 - 1 Overview of DX200 Setup Procedure

1-1
165559-1CD
HW1481993
DX200 Standard Setup
1 Overview of DX200 Setup Procedure
1 Overview of DX200 Setup Procedure
The following flowchart overviews how to set up the DX200.
YCP01
Setup
Programming
Pendant
Setup
Servo
Setup
System
Setup
Required Items:

Personal computer
(Either Windows95, Windows98, Windows98SE,
Windows2000, Windows XP, Windows VISTA
or Windows7 which can use CD and CF)

Shipping CF

CD (with system version pre-installed) distributed
from Yaskawa design division
Operation Time: Approx. 10 minutes
Required Items:

Personal computer
(Windows which can use CD and CF)

CF (or UCB) for operation

Operation Time: Approx. 18 minutes
DX200 setup
START
CF preparation
for YCP21
YCP21 setup
CF/USB preparation
for programming pendant
Programming pendant
setup
System configuration
initialization
in maintenance mode
EAXA21
boot setup
Required Items:

Boot ROM

Boot ROM board (BT2004)
Operation Time: Approx. 5 minutes
END
CD (with system version pre-installed) distributed
from Yaskawa design division
3/44