YASKAWA DX200 - 2 YCP21 Setup; Preparing the CF for YCP21

2 YCP21 Setup
2.1 Preparing the CF for YCP21
2-1
165559-1CD
HW1481993
DX200 Standard Setup
2 YCP21 Setup
Prepare the following items for the YCP21 setup operation.
• A personal computer: either Windows95, Windows98, or
Windows98SE, Windows2000, WindowsXP, WindowsVISTA,
Windows7, which can use CD and CF
• Shipping CF
• CD (with system version pre-installed) distributed from Yaskawa
design division
*The CF used for YCP21 requires no pretreatment because it is already formatted
by the CF manufacturer.
2.1 Preparing the CF for YCP21
Followings are the data writing procedures into the shipping CF which is to
be mounted on YCP21 (CPU) board.
1. Insert the CF into the CF reader/writer.
Insert
CF CF Reader/Writer
4/44