YASKAWA DX200 - Setting up the YCP21 Board

2-6
165559-1CD
HW1481993
DX200 Standard Setup
2 YCP21 Setup
2.2 Setting Up the YCP21 Board
2.2 Setting Up the YCP21 Board
1. Insert the CF prepared in Section 2.1 “Preparing the CF for YCP21” on
page 2-1 into the YCP21 board.
<Board Layout of DX200>
<CF Slot and Inserting Direction>
2. Move the CF slot cover to prevent the CF from dropping, and fix the
cover with screws.
The YCP21 setup has been completed.
YCP21
YSF21
YIF01
Move the CF slot cover to fix the CF.
CF slot:
Insert the CF with this surface facing right.
9/44