YASKAWA DX200 - Page 8

2 YCP21 Setup
2.1 Preparing the CF for YCP21
2-5
165559-1CD
HW1481993
DX200 Standard Setup
6. When the data has been written into the CF successfully, “OK” is
displayed in the second column under “Target Drives”. To prepare
seven CFs, it takes approx. two minutes.
7. Remove the CF from the CF reader/writer.
B: Boot sector write-in completed
D: File deletion completed
F: File copy completed
V: File copy completed (for version-up)
/ : Processing failed
: Processing passed
SUPPLE-
MENT
“NG” is displayed if the CF is not inserted correctly.
8/44