Table of Contents
ii
165559-1CD
HW1481993
DX200 Standard Setup
1   Overview of DX200 Setup Procedure.............................................................................................1-1
2   YCP21 Setup ..................................................................................................................................2-1
2.1   Preparing the CF for YCP21..............................................................................................2-1
2.2   Setting Up the YCP21 Board.............................................................................................2-6
3   Programming Pendant Setup..........................................................................................................3-1
3.1   Preparing the CF/USB for Upgrading ................................................................................3-2
3.2   Setting Up the Programming Pendant ...............................................................................3-8
4   EAXA21 Boot Setup........................................................................................................................4-1
5   Initialization of System Configuration in Maintenance Mode...........................................................5-1
6   Troubleshooting ..............................................................................................................................6-1
6.1   Possible Failures at Preparation of the CF ........................................................................6-1
6.2   Possible Failure at Setup of the Programming Pendant....................................................6-3
6.3   Programming  Pendant Flash Rom Format Procedure......................................................6-4
6.4   Redisplaying the Touch Calibration Display ......................................................................6-8
6.5   When the Message 'Cannot find YPP (or one of its components).' is Displayed.............6-10
6.6   Possible Failures at YCP21 Setup...................................................................................6-11