YASKAWA DX200 - Page 16

3 Programming Pendant Setup
3.1 Preparing the CF/USB for Upgrading
3-7
165559-1CD
HW1481993
DX200 Standard Setup
6. When the data has been written into the CF successfully, “OK” is
displayed in the second column under “Target Drives”. To prepare
seven CFs, it takes approx. five minutes.
7. Remove the CF from the CF reader/writer or the USB from the USB
slot.
SUPPLE-
MENT
“NG” is displayed if the CF is not inserted correctly.
16/44