YASKAWA FSDrive-MV1S - Page 124

User Constant Tables
5-59
Calender: U4
The constants used for monitoring calender are listed in the following table.
U2-15
Cumulative
operation time at
fault
(U1-13)
It is cleared by initialize. − 1H A A −
Elapsed time
U2-18
ASR output at fault
(U1-22)
It is cleared by initialize.
Motor rated
secondary current
0.01
%
No A −
ASR Output
U2-19
External torque
reference at fault
(U1-48)
It is cleared by initialize. Motor rated torque
0.01
%
AA −
Torque Reference
U2-20
Input torque
compensation at
fault
(U1-51)
It is cleared by initialize. Motor rated torque
0.01
%
No A −
Input T-Cmp
U2-21
Magnetic flux
reference at fault
(U1-53)
It is cleared by initialize. Motor no-load current
0.01
%
AA −
Mag-flux Ref
Constant
Number
Name
Description 100% Value
Min.
Unit
Control
Methods
MEMOBUS
Register
Display
Open-
loop
Vector
Flux
Vector
U4-01
Monitor Year
Monitor the years of calender. −−AA −
Year
U4-02
Monitor Month and
Date
Monitor the months and the
days of calender.
−−AA −
Month/Date
U4-03
Monitor Hour and
Minute
Monitor the hours and the min-
utes of calender.
−−AA −
Hour/Minute
U4-04
Monitor Minute and
Second
Monitor the minutes and the
seconds of calender.
−−AA −
Minute/Second
Constant
Number
Name
Description 100% Value
Min.
Unit
Control
Methods
MEMOBUS
Register
Display
Open-
loop
Vector
Flux
Vector