3-12
Fault History Mode
Fault history mode is used to display the fault history of a maximum of 256 data.
The record number of the fault history is attached, the latest data is 001 and the oldest data is 256. The display
data can be changed by the Increment Key and the Decrement Key. When a fault has occurred, the Shift/
RESET Key acts as a fault reset key. If a DATA/ENTER key is pressed, it will return to the drive mode.
Fig 3.7 Operation in Fault History Mode
MENU
Operation
INV * MODE sel *
-DRIVE-
Fault History Display
Mode Selection Display
Quick Setting
INV * MODE sel *
-QUICK-
Programming
INV * MODE sel *
-ADV-
Tuning Mode
INV * MODE sel *
-A TUNE-
MENU
A
MENU
MENU
ESC
DATA
ENTER
001 F OGF
Ground Fault
03/05/09 06:08:54
Fault History
128 A BAT
Weak Battery
03/03/1210:25:47
Fault History
256 F CFA
B5COM FLT
02/11/30 11:55:03
Fault History
A
Fault History
INV * MODE sel *
MENU
B
B
To Next Page
Loading...
