YASKAWA FSDrive-MV1S - Factory Settings: y

5-48
 Factory Settings: Y
Use the factory constants (Y constants) to set the hardware adjustment settings.
Factory Setting 2: Y1
The following table shows the user constants for factory setting 2 display.
* The factory settings depend on the Inverter capacity.
Constant
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Operation
Control
Methods
MEMOBUS
Register
Open-
loop
Vector
Flux
Vector
Display
Y1-22
Gain equivalent to
input voltage
Gain for adjustment of input
voltage detection value (Oper-
ated in inverse proportion)
0 to
10.000
5.389 No A A 785H
Input V Gain
Y1-23
Gain equivalent to
input current
Gain for adjustment of input
current detection value (Oper-
ated in inverse proportion)
0 to
15.000
6.600
*
No A A 786H
Input I Gain
Y1-24
Gain equivalent to
output voltage
Gain for adjustment of output
voltage detection value (Oper-
ated in inverse proportion)
0 to
10.000
5.389 No A A 787H
Output V Gain
Y1-25
Gain equivalent to
output current
Gain for adjustment of output
current detection value (Oper-
ated in inverse proportion)
0 to
10.000
8.712
*
No A A 788H
Output I Gain