Input Terminal Functions
6-47
Multi-Function Contact Inputs (H1-01 to H1-10)
Application Precautions
• Jog frequencies using FJOG and RJOG commands are given priority over other frequency references.
• When both FJOG command and RJOG commands are on for 500 ms or longer at the same time, the
Inverter stops according to the setting in b1-03 (stopping method selection).
Setting
Value
Function
Control Methods
Open-
loop
Vector
Flux
Vector
12 FJOG command (on: Forward run at jog frequency d1-17) Yes Yes
13 RJOG command (on: Reverse run at jog frequency d1-17) Yes Yes
To Next Page
Loading...
