4
Introduction
This manual is intended as an overview of parameter access for the Yaskawa model G7 drive and describes how to connect the G7 drive to RS-
232, RS-422 or RS-485. Refer to the G7 Drive Technical Manual (TM.G7.01) for detailed parameter information.
This document pertains to the G7 drive. In this document, the word “inverter”, “ac drive” and “drive” may be used interchangeably.
For details on installation and operation of the G7 drive, refer to the G7 Drive Technical Manual (TM.G7.01). All manuals and support files are
available on the CD that came with the G7 drive and are also available for download at www.yaskawa.com.
Modbus
®
is a registered trademark of Schneider Automation, Inc.
All trademarks are the property of their respective owners.
To Next Page
Loading...
