YASKAWA iQpump Micro

YASKAWA TOEP YAIQPM 01A iQpump Micro Quick Start Procedure
iQpump Micro
Quick Start Procedure
Page 2
of 31
Contents
STEP 1: 
UNPACK THE IQPUMP MICRO ..........................................................3
STEP 2:

IDENTIFY THE MODEL FOR INSTALLATION ....................................4
STEP 3:

PERFORM MECHANICAL INSTALLATION ........................................5
STEP 4:

MOTOR, LINE POWER AND START/STOP CIRCUIT ........................6
STEP 5:

INSTALL THE 24 V TRANSDUCER POWER SUPPLY ......................7
STEP 6:

ADJUST AND MONITOR IQPUMP MICRO SETTINGS ....................19
STEP 7:

APPLICATION SPECIFIC SETUP ....................................................20
STEP 8:

PARAMETER OVERVIEW-QUICK SETTING MENU (SIMPLEX) .....21
STEP 9:

IQPUMP MICRO PARAMETERS - ADVANCED SETTINGS ............23
STEP 10:

FINE-TUNE SETTINGS FOR PUMPING APPLICATION ..................24
STEP 11:

VERIFY PUMP ROTATION AND TRANSDUCER FEEDBACK ........26
STEP 12:

AUTO MODE OPERATION ................................................................27
STEP 13:

HAND MODE OPERATION ................................................................28