3.2 Function Modules
File Transfer
3-91
4. Set the FTP account information in the User Registration Dialog Box.
5. Click the OK Button.
6. Log off from the MPE720.
The settings are enabled.
No. Item Description Remarks
User Name
This is the name that the FTP client on
the remote device must use to log in to
perform a file transfer.
• You can enter up to 16 characters.
• The string is case sensitive.
Password
This is the password that the FTP client
on the remote device must use to log in
to perform a file transfer.
• You can enter up to 16 characters.
• The string is case sensitive.
User Privilege Reserved for system. Specify 0 for reading and writing.
Default
Privilege
Reserved for system. Specify 0 for reading and writing.
FTP Privilege
This is the file read and write privileges
that the FTP client on the remote device
will have during file transfers.
• Refer to the following section for details
on the tasks that are affected by the FTP
privilege settings.
FTP Privileges and Applicable FTP
Commands (page 3-92)
• A client cannot be set to writing only.
To Next Page
Loading...
