4 Teaching
4.4 Commands
4-26
HW1485509
HW1485509
2c. For Local Variable, select the variable type and enter its number on the
numeric keypad.
3. Press {SAVE} once the modification is complete.
Setting Comment
The comment is written next to the instruction. The comment can be from
0 to 32 alphanumeric and symbol characters in length.
1. Select {Comment}.
2. Enter the comment under “Enter Comment”.
3. Press {SAVE} on the input keyboard.
4. Press {SAVE ALL} once the modification is completed.
5. The comment is displayed in the job, next to the instruction.
Local Variable types will only be available if they have been
allocated for the job. For more information on Local
Variables, refer to chapter 4.8 “Local Variables”.
To Next Page
Loading...