1 Smart Pendant
1.5 Connection of the Smart Pendant
1-5
HW1485509
HW1485509
1.5.2 Connecting to the YRC1000micro
Connect the Smart Pendant cable to the connector (-X81) on the front
panel of the YRC1000micro.
Fig. 1-5: Connection of Smart Pendant Cable to the YRC1000micro
If the Smart Pendant is not used, connect the Smart
Pendant safety signal short circuit connector to connector
(-X81).
WARNING
• Do not remove the Smart Pendant cable while the YRC
Controller is powered on.
Failure to observe this instruction may result in fire and/or electric
shock.
To Next Page
Loading...