YASKAWA JZRCR-APP30-1 - 11.3.4.5 Setting of Safety Functions Output signals (FSOUT)

11 Safety Function
11.3 Safety Logic Circuit
11-31
HW1485509
HW1485509
11.3.4.5 Setting of Safety Functions Output signals (FSOUT)
These signals are shown when the functional safety function (option) is
enabled.
These signals allow to use the output signal of Safety Settings (Functional
Safety Function) in Safety Logic Circuit.
Safety fieldbus output signal can be named, also assigned to either Safety
Logic Circuit or Safety Settings (Functional Safety Function).
Table 11-9: Safety Function Output Signal
Item Description
- Signal is not specified
Safety Settings (F-SAFE #1 to #8) The signal can be used in the Safety
Settings (Functional Safety Function).
Only the terminal which the safety I/O
board is connected can be selected.
363 of 493