8 System and YRC Controller Setting
8.5 System Features
8-9
HW1485509
HW1485509
8.5.6 Output Full Selection Layout
Near the top of the output Detailed View. It has information for the
selected I/O groups as a block. Information about the YRC Controller is
shown in the System Features section on the Robot Controller Settings
Screen.
{Full Selection} has:
Selected output group numbers.
Selected output numbers.
Decimal or hexadecimal value for the entire block as one number.
Circles that show the status of each bit in the block, and the bit number
above each circle. Green is on, white is off. Zero is the least significant
bit.
To Next Page
Loading...