1 Smart Pendant
1.9 Startup Window
1-19
HW1485509
HW1485509
1.9 Startup Window
The YRC Controller performs an initial diagnosis when the main power is
turned ON. The startup window is shown on the Smart Pendant screen.
Fig. 1-14: Startup Window
In case the Smart Pendant does not complete the startup sequence due
to an error, such as YRC Controller incompatibility, an {Export Logs...} will
appear. This button can be used to save internal logs to a USB storage
device to aid troubleshooting by a YASKAWA Representative.
The MODE switch will not work during Smart Pendant
startup. MODE switch will work once the Smart Pendant
startup is complete.
To Next Page
Loading...