4 Teaching
4.4 Commands
4-28
HW1485509
HW1485509
4.4.6 Command Builder
Command Builder is used to add basic commands to a job. Command
Builder uses simple instructions to support ease of use for users.
Command Builder can be used to add three basic types of command:
– SET
– READ
– WAIT
1. Open the Command Builder from the {COMMANDS} tab.
2. Select the command type from the tab.
3. Select the command from the list.
4. Select the variable from the list or insert the value in the box.
(Ex. B003 and 10)
5. Press {Add Command}.
To Next Page
Loading...