2 Manipulator Coordinate Systems and Operations
2.4 Coordinate Frames and Manipulator Jogging
2-14
HW1485509
HW1485509
2.4.3 XYZ – World Mode
In the XYZ – World mode, the manipulator moves parallel to the X, Y, or Z
axes defined with respect to the manipulator base.
Fig. 2-10: XYZ-World Mode Operation
Fig. 2-11: Programming Panel of Robot Jog Panel for XYZ – World Mode
Axis Operation in XYZ – World Mode
When two or more [Jog Keys] are pressed at the same time
on the membrane keypad, the manipulator performs a
combined movement. However, if two different directional
keys for the same axis are pressed simultaneously (such as
[X-] + [X+]), this axis will not operate. The touch screen {Jog
Keys} only operate one button at a time.
To Next Page
Loading...