YASKAWA JZRCR-APP30-1 - Page 354

11 Safety Function
11.3 Safety Logic Circuit
11-22
HW1485509
HW1485509
 Pulse
Output signal with Pulse.
Up to 8 “Pulse” Outputs can be set.
< When setting the 1 sec to Pulse>
 ON Delay
Turn ON signal after timer delay.
Up to four “Pulse” Outputs can be set.
< When setting the 500 msec to ON Delay>
NOTE
To use “Detect OFF→ON” or “Detect ON→OFF” for Input
relay, Output relay should be “Pulse”. Also, to use “Pulse”
for Output relay, one of the input relay should be “Detect
OFF
→ON” or “Detect ON→OFF”.
Number of Input relay should be two or less.
500msec
ON DELAY time
Output
Safety logic output
354 of 493