YASKAWA L1000A User Manual

YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide 3
■ Quick Reference
Drive a Synchronous PM Motor
L1000A can operate synchronous PM motors. Refer to Flowchart C: Auto-Tuning for PM Motors
on page 71.
Perform Auto-Tuning
Automatic tuning sets motor parameters. Refer to Types of Auto-Tuning on page 73.
Maintenance Check Using Drive Monitors
Use drive monitors to check fans, capacitors, and other components may require maintenance. Refer to Performance Life Monitors Maintenance
Monitors on page 146.
Fault Display and Troubleshooting
Refer to Troubleshooting on page 132.
Standards Compliance
Refer to European Standards on page 216 and UL and CSA Standards on page 224.
CSA B44.1 /
ASME A17.5
YEA
_co
mmo
n
TOEP_C710616_38H_7_0.book 3 ページ ２０１５年１１月１１日 水曜日 午後７時４０分

YASKAWA L1000A Specifications

General

Model	L1000A
Category	Controller
Enclosure Rating	IP20
Input Voltage	200-240V, 380-480V
Control Method	V/f Control, Open Loop Vector Control
Application	Elevators
Voltage Class	200V, 400V
Safety	Safe Torque Off (STO)
Communication	CANopen, Modbus
Output Voltage	0 to Input Voltage
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Humidity	5% to 95% (non-condensing)
Current Range	Varies by model (refer to datasheet)
Power Rating	Varies by model (refer to datasheet)