YASKAWA L1000A - Three-Phase 200 V Class Drives

A Specifications
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide 161
Specifications
A
A Specifications
◆ Three-Phase 200 V Class Drives
Table 55 Power Ratings (Three-Phase 200 V Class)
Item
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater
than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency can be set up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
<6> Carrier frequency can be set up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
Specification
CIMR-LU2
000
8
0011
001
4
001
8
002
5
003
3
004
7
006
0
007
5
008
5
0115
014
5
018
0
021
5
028
3
034
6
041
5
Maximum Applicable Motor Capacity
(HP)
<1>
234
3.7
(5)
7.5101520253040506075100125150
Input
Input Current (A) <2> 7.5 11 15.6 18.9 28 37 52 68 80 82 111 136 164 200 271 324 394
Rated Voltage
Rated Frequency
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc
<3>
Allowable Voltage Fluctuation -15 to 10%
Allowable Frequency
Fluctuation
±5%
Input Power (kVA) 4.1 5.8 7.8 9.5 14 18 27 36 44 37 51 62 75 91 124 148 180
Output
Rated Output Capacity (kVA) <4>
3
<5>
4.2
<5>
5.3
<5>
6.7
<5>
9.5
<5>
12.6
<5>
17.9
<5>
23
<5>
29
<5>
32
<5>
44
<5>
55
<6>
69
<6>
82
<6>
108
<6>
132
<6>
158
<6>
Rated Output Current (A)
8
<5>
11
<5>
14
<5>
17.5
<5>
25
<5>
33
<5>
47
<5>
60
<5>
75
<5>
85
<5>
115
<5>
145
<6>
180
<6>
215
<6>
283
<6>
346
<6>
415
<6>
Overload Tolerance 150% of rated output current for 60 s
Carrier Frequency User adjustable between 2 and 15 kHz
User adjustable between 2 and 10
kHz
Maximum Output Voltage (V) Three-phase 200 to 240 V (proportional to input voltage)
Maximum Output Speed (Hz) 200 Hz (user-set)
TOEP_C710616_38H_7_0.book 161 ページ ２０１５年１１月１１日 水曜日 午後７時４０分