EasyManua.ls Logo

YASKAWA L1000E - Page 166

YASKAWA L1000E
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B Parameter Table
166 YASK AWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
b8: Energy Saving
C: Tuning
C parameters are used to adjust the acceleration and deceleration ramps, jerk settings, slip compensation, torque
compensation, and carrier frequency selections.
C1: Acceleration and Deceleration Ramps
No.(Addr.) Name Description Setting
b8-01
(1CCH)
Energy Saving Control
Selection
0: Disabled
1: Enabled
Default: 0
Min: 0
Max: 1
b8-16
(1F8H)
Energy Saving Control
Constant (Ki)
Enter the Energy Saving value (Ki) as specified on the motor name plate. (for
IPM motors only)
Default: 0.10
Min: 0.00
Max: 2.00
b8-17
(1F9H)
Energy Saving Control
Constant (Kt)
Enter the Energy Saving value (Kt) as specified on the motor name plate. (for
IPM motors only)
Default: 1.00
Min: 0.00
Max: 2.00
No.
(Addr.)
Name Description Setting
C1-01
(200H)
Acceleration Ramp 1
Sets the ramp to accelerate from 0 to maximum speed.
Default: 1.50 s
<6> <8>
Min: 0.00 s
Max: 600.00 s
<6> <8>
C1-02
(201H)
Deceleration Ramp 1
Sets the ramp to decelerate from maximum speed to 0.
C1-03
(202H)
Acceleration Ramp 2
Sets the ramp to accelerate from 0 to maximum speed.
C1-04
(203H)
Deceleration Ramp 2
Sets the ramp to decelerate from maximum speed to 0.
C1-05
(204H)
Acceleration Ramp 3 (Motor
2 Accel Time 1)
Sets the ramp to accelerate from 0 to maximum speed.
C1-06
(205H)
Deceleration Ramp 3 (Motor
2 Decel Time 1)
Sets the ramp to decelerate from maximum speed to 0.
Default: 1.50 s
<6> <8>
Min: 0.00 s
Max: 600.00 s
<6> <8>
C1-07
(206H)
Acceleration Ramp 4 (Motor
2 Accel Time 2)
Sets the ramp to accelerate from 0 to maximum speed.
C1-08
(207H)
Deceleration Ramp 4 (Motor
2 Decel Time 2)
Sets the ramp to decelerate from maximum speed to 0.
C1-09
(208H)
Fast Stop Ramp
Sets the ramp for the Fast Stop function.
C1-10
(209H)
Accel/Decel Setting
Resolution
0: 0.01 s unit
1: 0.1 s unit
Default: 0
Min: 0
Max: 1
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_
All Modes
common
_

Related product manuals