2 Transport
2.1 Transport Method
2-3
177010-1CD
HW1483759
MH215 II
2.1.2 Using a Forklift
When using a forklift, the manipulator should be fixed on a pallet with
shipping bolts and brackets as shown in
Fig. 2-2 “Transport Using a Forklift”.
Insert forklift claws in the forklift claw entries of the shipping brackets or
the pallet, and lift it. The pallet must be strong enough to support the
manipulator. Transport the manipulator slowly with due caution in order to
avoid overturning or slippage.
Fig. 2-2: Transport Using a Forklift
Pallet
Shipping bolts and brackets
(Fixed to the manipulator
before shipment.)
Screw M20
(8 screws)
(Pallet) Forklift claw entries
(Shipping bolts and brackets)
Forklift claw entries
To Next Page
Loading...
