8 Electrical Equipment Specification
8.1 Position of Limit Switch
8-3
177010-1CD
HW1483759
MH215 II
8.1.3.3 Setting Range of LU-Axes Interference Angle
L- and U-axes interference limit switches are designed to check the
interference angle of L- and U-axes.
As shown in Fig. 8-3 “LU-Axes Interference Angle”, the operation range of
U-axis can be set to any angles within +8° to +288° as the interference
angle with L-axis.
Fig. 8-3: LU-Axes Interference Angle
U-axis center
of rotation
280
8
To Next Page
Loading...
