9-5
177010-1CD
HW1483759
9 Maintenance and Inspection
9.2 Notes on Maintenance Procedures
MH215
II
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
The battery packs are installed in the position shown in Fig. 9-2(a)
“Battery Location (Back View)” and Fig. 9-2(b) “Battery Location (Top
View)”.
If a battery alarm occurs in the DX200, replace the battery in accordance
with the following procedure:
Fig. 9-2(a): Battery Location (Back View)
Fig. 9-2(b): Battery Location (Top View)
Plate
Mounting screw M4
Connector base
S1
2BC
1BC
AB
FB
Battery pack
Board